la crosse technology

La Crosse Technology ® Customer Support Site

Before contacting Customer support, here are the common troubleshooting steps: Before contacting customer support, here are the steps to solving common problems:
Batteries are the # 1 warranty issue we see. The battery is # 1 warranty problems that we see. Please be sure you are using name brand alkaline batteries plain dated at least 7 years in advance or post it to 1:48 on a voltmeter that reads in numbers. Make sure you use brand name alkaline batteries used to date at least 7 years in advance or test to 1.48 on the voltmeter that reads in numbers.

*** Restart basic clocks and weather stations that do not have wind or rain: Basic *** Restart the clock and weather stations that do not have wind or rain:
In order to establish proper communication between the display and outdoor transmitter it is important that they be set up as follows: In order to establish proper communication between the screen and the external transmitter is important that they should be defined as follows:

# Bring both units inside and have the units 3-5 feet apart with nothing between them.
# Remove all power from both units. Remove all power from both units.
# Press one of the buttons on the display at least 20 times to clear all memory. Press a button on the screen at least 20 times to remove all the memory. Verify that the display is blank before proceeding. Prove that the blank screen before proceeding.
# Let the all units sit with batteries out for 10 minutes. Let all units sit with the battery out for 10 minutes.
# Be sure to use a new, Name Brand Alkaline battery dated at least 7 years in advance (super, ultra, max, heavy duty and rechargeable types should be avoided). Be sure to use a new, Name Brand Alkaline batteries on at least 7 years in advance (super, ultra, max, and rechargeable heavy duty type should be avoided). Place them back into the remote sensor; making sure they are installed according to the diagrams in the battery compartment. Putting them back to the remote sensor; make sure they fitted in accordance with the diagram in the battery compartment.
Next, taking care not to press any buttons, reinstall the batteries in the display according to the diagram in the battery compartment. Next, be careful to not press any buttons, reinstall the battery on the screen according to the diagram in the battery compartment.
# Do not press any buttons for at least 15 minutes after installing the batteries. Do not press any button for at least 15 minutes after installing the battery. (Let them establish a good connection.) (Biarkan mereka membangun hubungan yang baik.)
# The temperature should be showing on your display. Temperature should be displayed on your screen. You can now put your sensor back outside. You now can place your sensor back outside.